English
简体中文
Español
Русский
日本語
Deutsch
Français
Português
Home
Products
Commercial water purifier
Household water purifier-Whole House Water Filter System
Water treatment equipment
Outdoor water purifier
Industrial water purifier system
Air Purifier
Water Softener System
Case
Case Example
Feedback
News
About Us
English
Home
Products
commercial water purifier household water purifier-whole house water filter system water treatment equipment industrial water purifier system air purifier water softener system
Case
case example
Feedback
News
About Us
en
简体中文 Español Русский 日本語 Deutsch Français Português
Water purification information
Home > Water purification information

What is the difference between softened water and other water

Views : 73856
Update time : 2021-09-24 15:03:21
In daily life, we often see scale formation on the inner wall of the kettle after being used for a long time. What is the reason? It turns out that the water we take contains many inorganic salts, such as calcium and magnesium salts. These salts are invisible to the naked eye in water at room temperature. Once they are heated and boiled, a lot of calcium and magnesium salts will precipitate out as carbonates, and they will form scale when they cling to the kettle wall.

We usually use the index of "hardness" to express the content of calcium and magnesium ions in water. A hardness of 1 degree is equivalent to 10 mg of calcium oxide per liter of water. The water below 8 degrees is called soft water, the water above 17 degrees is called hard water, and the water between 8 to 17 degrees is called moderately hard water. Rain, snow, rivers, rivers, and lakes are all soft water, spring water, deep well water, and sea water are all hard water
Raw water refers to untreated water. In a broad sense, the water before entering the water treatment process is also called the raw water of the water treatment. For example, the water sent from the water source to the clarification tank is called raw water.
　　
Softened water refers to water whose hardness (mainly refers to calcium and magnesium ions in water) has been removed or reduced to a certain extent. In the process of water softening, only the hardness decreases, while the total salt content does not change.

Desalting water refers to water that has been removed or reduced to a certain extent by salts (mainly strong electrolytes dissolved in water). The electrical conductivity is generally 1.0～10.0μS/cm, the resistivity (25℃)(0.1～1.0)×106Ω˙cm, and the salt content is 1～5mg/L.

Pure water refers to the water that has been removed or reduced to a certain extent by the strong and weak electrolytes (such as SiO2, CO2, etc.) in the water. The electrical conductivity is generally 1.0～0.1μS/cm, and the electrical conductivity (1.01.0～10.0)×106Ω˙cm. The salt content is <1mg/L.

Ultrapure water refers to the water in which the conductive medium in the water is almost completely removed, and the non-dissociated gases, colloids, and organic substances (including bacteria, etc.) are also removed to a very low level. Its electrical conductivity is generally 0.1～0.055μS/cm, resistivity (25℃) ﹥10×106Ω˙cm, salt content ﹤0.1mg/L. Ideal pure water (theoretically) has a conductivity of 0.05μS/cm and a resistivity (25°C) of 18.3×106Ω˙cm.
Previous :
Next :
Related News
Read More >>
Do you know what factors affect reverse osmosis desalination rate? Do you know what factors affect reverse osmosis desalination rate?
Sep .27.2024
Does your reverse osmosis equipment often wash the membrane, change the membrane? Does your reverse osmosis equipment often wash the membrane, change the membrane?
Sep .27.2024
Users reflecting their own purchase of reverse osmosis equipment frequently wash membrane, reverse osmosis membrane use life is short and other issues. Today Susan organized a compilation of reverse osmosis equipment for reference, welcome to exchange, correction.
Do you know what you should do when the water purification equipment has a low water output rate? Do you know what you should do when the water purification equipment has a low water output rate?
Sep .26.2024
Today, Susan will give you a detailed answer to this question: Under normal circumstances, the phenomenon of low water output rate and high voltage of water purification equipment is mainly due to It is caused by instrument readings, temperature, inlet water conductivity, potential water side pressure, pressure difference, membrane element attenuation, membrane element pollution, untimely maintenance, etc.
Do you know the difference between ultrafiltration membrane and ro reverse osmosis membrane? And How to choose them? Do you know the difference between ultrafiltration membrane and ro reverse osmosis membrane? And How to choose them?
Sep .25.2024
Ultrafiltration membrane and 0 reverse osmosis membrane are both industrial filter membrane, in the production of industrial water filtration have a great role, but these two membrane elements are different in many ways. Understand the difference between the two before you can make a better choice.
Xiamen Ouge Digital Technology Co., Ltd
en
简体中文 Español Русский 日本語 Deutsch Français Português
Susan Susan
Susan
Susan Huang